Step 5: change settings via mac address -10, Step 5: change settings via mac address – Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers User Manual
Page 20
Advertising
Publication 1753-PM001A-EN-P - November 2005
1-10 Connect to the GuardPLC Controller
Step 5: Change Settings via MAC Address
1. Enter desired settings for the IP and SRS in the Communication
Settings fields indicated by the arrows below.
2. Click the Set via MAC button.
3. Enter the default username ‘Administrator’ in the Authentication
window, as shown below.
4. Click OK.
Advertising
This manual is related to the following products: