Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 117)

1 Publication 1753-PM001A-EN-P - November 2005
Appendix
C
Create a Time-based Variable
To create a timer variable, you need to create a value field, enter the
time value, and connect that field to your function block.
1. In the Function Block Diagram Editor, right-click in any open
space on the page and choose Create Value Field.
2. Move the cursor to position the value field.
3. Click on the place where you want the value field to reside.
4. Enter the timer value preceeded by T#.
Time values can be entered in days (d), hours (h), minutes (m),
seconds (s), and milliseconds (ms).
Timer Value Examples Description
T#14.7h 14.7 hours
T#10ms 10 milliseconds
T#23h17m 23 hours and 17 minutes
T#5d13h45m6s7.8ms 5 days, 13 hours, 45 minutes, 6 seconds, and
7.8 milliseconds