Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 109)

Publication 1753-PM001A-EN-P - November 2005
Configure the GuardPLC OPC Server B-3
8. In the project tree, right-click Configuration and choose
New>OPC-Server. The OPC server appears in the project tree.
Configure the GuardPLC
System for OPC
Communication Configure the Communication Network
1. In the Hardware Management window, right-click the OPCtest
Project and choose New>HH-Network.
2. Expand the HH-Network.
3. Right-click Token Group and choose Node Editor.
4. Drag the OPC-Server and G16OPC01 onto the Node Editor.
5. Close the Node Editor.
6. Right-click OPC-Server and choose Edit.