Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 63)

Publication 1753-PM001A-EN-P - November 2005
Create a GuardPLC Project 3-23
3. Close the On-Line Test when finished testing.
4. Click the PROJ tab to return to the project tree.
If the lines are RED/BLACK striped, then the Control Panel is
NOT online with the GuardPLC controller or the controller is not
in RUN mode.
See Chapter 2 for information on going online with the
GuardPLC controller.
TIP
For more information on downloading, see
Chapter 4.