Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 62)

Publication 1753-PM001A-EN-P - November 2005
3-22 Create a GuardPLC Project
How to Monitor the Routine
Online To monitor the routine online, you must be online with the controller,
and the controller must be in RUN mode.
1. In the Project Management window, right-click Resource and
choose ON-Line Test.
The Project Manager appears as shown below.
2. Double left-click [I] TypeInstance.
If the lines appear RED (TRUE) and BLUE (FALSE), then the
monitor is active. Test the routine and monitor the function
code.