Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 87)

1 Publication 1753-PM001A-EN-P - November 2005
Chapter
8
Create User-Defined Function Blocks
In This Chapter
Create User-Defined
Function Blocks With RSLogix Guard PLUS! software, you can create user-defined
function blocks that consist of standard function block logic, as shown
in the illustrations below.
Existing Function Block
For information about See page
creating user-defined function blocks 8-1
declaring variables 8-4
moving declared variables to the user-defined function block page 8-9
generating function block code 8-10
User-Defined Function Blocks