Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 55)

Publication 1753-PM001A-EN-P - November 2005
Create a GuardPLC Project 3-15
4. Minimize the Hardware Management window.
5. In the Project Management project tree, expand StandardLibs,
IEC61131-3, and Bistr as shown below.
6. Drag an AND and an OR block onto the routine (Left-click, hold,
drag and release).
TIP
You can delete the white areas under the
signals, which are used for descriptions, by
clicking the white area and hitting the Delete
key.