Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 9)

1 Publication 1753-PM001A-EN-P - November 2005
Preface
Who Should Use This
Manual Use this manual if you are responsible for programming, or
troubleshooting control systems that use GuardPLC controllers.
Personnel responsible for installation, programming, operation, and
troubleshooting of safety-related controllers must be familiar with
relevant safety standards for Programmable Electronic Systems (PES).
Purpose of this Manual The manual provides procedural information on programming your
controller system, including information on establishing
communication between your programming terminal and the
GuardPLC controller, creating a GuardPLC project, adding GuardPLC
distributed I/O to your project, and creating user-defined function
blocks.
For information on installing, configuring, operating, and monitoring
the status of your GuardPLC controller system, refer to the GuardPLC
Controller Systems User Manual, publication number 1753-UM001.
This manual does not provide information on SIL 3 or Cat. 4 safety
application requirements. For detailed information on the safety policy
regarding GuardPLC controllers, including information on the
controller’s central functions, input and output channels, operating
system, application program safety and regulations for use, refer to the
GuardPLC Controller Systems Safety Reference Manual, publication
number 1753-RM002.
Related Documentation The table on the following page lists documents that contain
additional information concerning Rockwell Automation GuardPLC
products.
If you would like a manual, you can:
• download a free electronic version from the internet at
www.rockwellautomation.com/literature.
• purchase a printed manual by contacting your local
Allen-Bradley distributor or Rockwell Automation sales office.