Rockwell Automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardPLC Controllers - Manual (Page 22)

Publication 1753-PM001A-EN-P - November 2005
1-12 Connect to the GuardPLC Controller
2. Make sure Resource is selected in the Resource Selection
window and click OK.
3. Click Yes.
This moves the IP address and SRS of the GuardPLC controller to your
offline project and overwrites the existing values. These new values
are used in the login screen to connect with the GuardPLC controller.
Step 7: Use the Control Panel to Connect to the GuardPLC
Controller
1. Right-click [60000] Resource.
2. Choose Online>Control Panel.
3. Type [Ctrl]+[A] to fill in the default Username, Password, and
Access Type in the Login Window.
4. Click OK.