Add a peer controller – Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers User Manual
Page 105
Advertising
![background image](/manuals/579650/105/background.png)
Publication 1753-UM002A-EN-P - July 2005
Configure Peer-to-Peer DeviceNet Communications B-3
Add a Peer Controller
To add a peer controller Resource to the project:
1. In RSLogix Guard PLUS! Project Management, right-click on
Configuration and select New>Resource.
2. Name the resource.
3. In RSLogix Guard PLUS! Hardware Management, configure the
resource properties by right-clicking on the resource and
selecting Properties.
Advertising