Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers - Manual (Page 34)

Publication 1753-UM002A-EN-P - July 2005
3-6 Set Up Your DeviceNet Network
3. Click on the Password… button.
4. Enter the Old Password, if one exists.
5. Enter and confirm the new password.
Passwords may be from 1 to 40 characters in length and are not
case-sensitive. Letters, numerals, and the following symbols may
be used: ‘ ~ ! @ # $ % ^ & * ( ) _ + , - = { } | [ ] \ : ; ? / .
6. Click OK.
Forgotten Passwords
If you forget the password, you can reset it.
1. On the Safety tab of the Device Properties dialog, click on the
Password… button to open the Set Device Password dialog.
2. Click on the Reset Password… button.
TIP
You can also access the Set Device Password
dialog by either:
• clicking on the module and choosing Set
Password… from the Device menu, or
• right-clicking on the module and selecting
Set Password….