Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers - Manual (Page 107)

Publication 1753-UM002A-EN-P - July 2005
Configure Peer-to-Peer DeviceNet Communications B-5
Create Required Signals
Using RSLogix Guard PLUS! Hardware Management, create the signals
that will be made available to peers on the DeviceNet Safety network
via the Target Connections file.
1. Open the Signal Editor by selecting Editor from the Signals
menu.
2. Click on the New Signal button to add new signal.
3. Name the signal and configure its properties.
4. Leave the Signal Editor open.
For more information on using the Signal Editor, refer to the
GuardPLC Controller Systems User Manual, publication 1753-UM001.