Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers - Manual (Page 66)

Publication 1753-UM002A-EN-P - July 2005
7-4 Associate the Scanner and Controller and Download the DeviceNet Network Configuration
Manually Associate the
Scanner and Controller If you manually associate the scanner and controller, you must repeat
this procedure whenever you make a change to the DeviceNet
connections.
To manage the association between the safety scanner and the
GuardPLC controller manually:
1. On the GuardPLC tab of the Device Properties dialog, verify that
the Controller ID matches the GuardPLC controller to which you
want the scanner associated.
2. Click on the Export Scanner Signals… button.
3. Save the Scanner Signals file. The Scanner Signal file’s extension
is .ssf.