Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers - Manual (Page 81)

Publication 1753-UM002A-EN-P - July 2005
Verify Your DeviceNet Safety Configuration 9-5
Review the Safety Device
Verification Reports The Review page displays safety devices with status of either ‘Verify
FAILED’ or ‘Ready to be Safety Locked’.
1. Click on the Review hyperlink in the Report column to launch
the device’s HTML report in your default browser.
2. Click the Review All button to generate an HTML verification
report for all of the devices listed.
3. Review and print the verification reports for your records.
TIP
If a device’s status is ‘Verify FAILED’ more
information is provided in the verification failure
report.
IMPORTANT
You must review the device configurations and
record the configuration signatures prior to
operating a safety application.