Configure standard outputs -11, Configure standard outputs – Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers User Manual
Page 53
Advertising
![background image](/manuals/579650/53/background.png)
Publication 1753-UM002A-EN-P - July 2005
Configure DeviceNet Nodes and Connections 5-11
Configure Standard Outputs
The Output tab screen allows you to define how data from the
scanner is mapped to the outputs of the slave devices.
The graphical window at the top shows each devices node number,
catalog number, type of connection that is used between the scanner
and the slave device (strobed, polled, cyclic or change of state), the
amount of data that will be exchanged (in bytes), and the location of
the data within the controller’s scanner’s standard output image.
Advertising