Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers - Manual (Page 26)

Publication 1753-UM002A-EN-P - July 2005
2-6 Install the 1753-DNSI
DeviceNet Connections
Wire the DeviceNet Connector
Use an open-style 5- or 10-position linear plug to connect to the
DeviceNet network.
Wire the connector according to the following illustrations:
IMPORTANT
For detailed DeviceNet connection information, refer
to the DeviceNet Cable System Planning and
Installation Manual, publication DN-6.7.2. Also refer
to the Industrial Automation Wiring and Grounding
Guidelines, publication 1770-4.1.
Front View Bottom View
DeviceNet Safety Port
HSP Port
D
D
D
D
D
Red
White
Bare
Blue
Black
DeviceNet cable
10-position
linear plug 5-position
linear plug
Connect To
Red Wire V+
White Wire CAN High
Bare Wire Shield
Blue Wire CAN Low
Black Wire V-