Rockwell Automation 1753-DNSI DeviceNet Safety Scanner for GuardPLC Controllers - Manual (Page 82)

Publication 1753-UM002A-EN-P - July 2005
9-6 Verify Your DeviceNet Safety Configuration
Lock Safety Devices
1. Choose which devices to Safety-Lock by selecting the checkbox
in the Lock column for each device that is ready to be
Safety-Locked.
2. You must check the acknowledgement box before the locking
process can continue.
3. Click Next.
4. The wizard performs a final comparison of the configuration
signature in each safety device to its configuration signature in
RSNetWorx for DeviceNet before locking the device.
5. If any of the selected devices are password-protected, you will
be prompted to enter the password for that device.
If you want to skip the device and allow the locking process to
continue for other devices, click on Skip.
IMPORTANT
Before you lock your safety device configurations,
you must perform all of the verification steps
required for your application.