Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 109)

1 Publication 2707-PM002B-EN-P
Chapter
15
Upgrading the Operating System
Chapter Objectives This chapter describes how to update the MicroView operating system
while maintaining the current application file.
Steps to Upgrade the
Operating System To upgrade the Operating System currently installed in the MicroView
without changing the application file.
1. Apply power to the MicroView and set the MicroView to the
Program Mode.
The following message will appear in the window of the
MicroView.
If you do not see this message, consult the MicroView Users
Manual (Publication No. 2707-UM005B-EN-P) for information on
how to access the Program Mode.
2. On your computer, move to the /MDPS subdirectory where the
software resides.
C:\MDPS>
3. Type dps and press [Return] to start the program.
C:\MDPS>dps [Return]
4. Specify whether you are using a color monitor. Enter [Y] or [N].
The Startup Screen displays. You will not see this screen if a
monitor was specified during installation of the software.
5. Press any key to continue.
Programming Mode
“MENU” to Exit