Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 80)

Publication 2707-PM002B-EN-P
12-2 Entering MicroView Configuration Data
Accessing Configuration
Data The following shows how to access MicroView configuration data.
1. Select Edit Program File from the Opening menu.
You are prompted for a file name.
2. Enter the file name of the application.
The Edit File - Option Selection menu displays.
3. Select MicroView Configuration Data.
The Configuration - Option Selection menu displays.
4. Select the configuration item you want to modify. Refer to the
appropriate section in this chapter for additional information.