Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 45)

Publication 2707-PM002B-EN-P
Creating Menu and Sub-Menu Screens 6-3
Main Menu and Sub-Menu
Screen Builder The screen for creating the main menu and sub-menu screens is the
same. Both the main menu and sub menu screens can display up to a
16 character two line message.
Menu Screen Builder Function Keys
Function
Key Designation Function
[F3] LINK
SCREENS Accesses screen mapping functions that link
application screens in a logical sequence.
Link screens only after all of the screens have been
created. Refer to Chapter 11.
[F4] COPY
SCREEN Copies an existing screen to or from the current
display window. Both the source and destination
screens must be of the same type (Menu screens).
[F7] CLEAR
SCREEN Clears the current screen. You have the option of
clearing only the screen text or deleting the entire
screen including any linking you may have
established.
[F8] CHANGE
SCREEN Selects another operator screen.
[F9] SAVE Saves the application without exiting the Screen
Builder function.
[F10] EXIT Prompts you to save the application to the current file
and exits the DPS software.