Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 61)

Publication 2707-PM002B-EN-P
Creating Data Entry Screens 8-5
7. Select a register type.
You are prompted for data specific to the selected register type:
8. Enter the register data. Refer to the next section Data Entry
Register Format Selections.
9. After entering the register data, press [Esc] to save the data and
return to the screen editing. The data entry register field is
indicated by a series of diamonds. The number of diamonds
and format (decimal point and sign) is determined by the
register data you entered.
10. Press [F9] to save the screen, any text entered after the data entry
field will not be displayed.
Data Entry Register