Creating a menu screen, Creating a menu screen -4 – Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL User Manual
Page 46
![background image](/manuals/580649/46/background.png)
Publication 2707-PM002B-EN-P
6-4 Creating Menu and Sub-Menu Screens
Creating a Menu Screen
To create a menu screen:
1. Select Screen Builder from the Edit File - Option Selection menu.
The Screen Builder for the main menu (screen #1) is displayed.
2. If you are creating a sub-menu, press [F8], enter the screen
number, and select a sub-menu screen type.
The screen builder for a sub-menu is displayed. The sub-menu
screen builder is the same as the main screen (shown above).
3. Enter the screen text. The sequence, length and location of the
text does not matter but make sure you number each menu item
(1 through 8).
4. Press [F9] to save the screen.
IMPORTANT
You can’t link screens to a menu until all of the
application screens have been created. Chapter 11
describes how to link screens to a menu.