Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 39)

Publication 2711-PM002B-EN-P
Using Screen Builder 5-5
Copying Screens Use the copy function [F4] to save time when creating similar screens.
Both the source screen and the destination screen must be of the
same type. For example, you can’t copy Data Entry screen text into a
Data Display screen.
When you copy a screen, all register data and display text is also
copied. Edit the screen as needed after copying.
To copy a screen:
1. Open the screen you want to copy the screen to or from. In this
example, a Data Display screen:
2. Press [F4]. You are prompted for the screen to copy to or from:
3. Press [F1] to copy the current screen to another screen. Press
[F2] to copy another screen to the current screen.
You are prompted for a screen number.