Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 40)

Publication 2711-PM002B-EN-P
5-6 Using Screen Builder
4. Enter the screen number and press [Return].
The screen is copied.
5. Edit the copied screen text and/or register data, refer to
descriptions of individual screen types (Chapters 6 through 10).
After you have completed an application screen, use [F8] Change
Screen to edit another screen. You can change to any screen.
Selecting Other Screens To change screens:
1. Select [F8] Change Screen.
2. Enter the screen number you want to change to or select one of
the function keys:
The selected screen is displayed.
Function Key Designation Function
[F1] FIRST SCREEN Returns to screen #1, the main menu.
[F6] NEXT UNUSED Selects the next unused screen.
[F7] LAST SCREEN Selects the last programmed screen.
[F8] NEXT PROG Selects the next programmed screen.