Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 38)

Publication 2711-PM002B-EN-P
5-4 Using Screen Builder
Editing Screen Displays When you are editing screen text, the following editing operations are
available:
Screen Text Edit Functions
The extended MicroView character set can be used, refer to Appendix
A for additional information.
Screen Builder Function keys
The following function keys are available on most screen types.
Screen Edit Key Function
[ ] [ ] [ ] [ ] Move the screen cursor.
[Del] Deletes the character at the cursor position.
[Back Space] Deletes the character to the left of the cursor position.
The cursor is moved to the left one space.
[Ins] Toggles the insert mode on or off. Characters entered in
the insert mode are shifted to the right. A block shaped
cursor indicates the insert mode is on. An underline
cursor indicates that insert mode is off.
Function Key Designation Function
[F3] LINK SCREENS Accesses screen mapping functions that link
application screens in a logical sequence.
Link screens only after all of the screens have
been created.
[F4] COPY SCREEN Copies an existing screen to or from the current
display window. Both the source and destination
screens must be of the same type (such as Data
Display screens).
[F7] CLEAR SCREEN Clears the current screen. You have the option of
clearing only the screen text or deleting the entire
screen including any linking you may have
established.
[F8] CHANGE
SCREEN
Displays menu for selecting another screen.
[F9] SAVE Saves the application without exiting the Screen
Builder function.
[F10] EXIT Prompts you to save the application to the current
file and exits the DPS software.