Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 88)

Publication 2707-PM002B-EN-P
12-10 Entering MicroView Configuration Data
Com Port Setup
Selecting Com Port Setup displays:
The Communications Port parameters have the following default
values for the MicroView:
Baud Rate: 9600
Parity: None
Data Bits: 8
Baud Rate
Default is 9600 baud. Baud rate options are 19200, 9600, 2400, 1200,
and 300.
Parity
Parity of the MicroView’s communications port is fixed at (None) and
it can not be changed.
Data Bits
Defines the data length. The number of data bits of MicroView’s
communication port is fixed at eight bits.