Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 58)

Publication 2707-PM002B-EN-P
8-2 Creating Data Entry Screens
Data Entry Screen Builder The screen for creating data entry screens has a display size of 2 lines
of 16 characters.
Data Entry Screen Builder Function Keys
Function
Key Designation Function
[F1] DISPLAY REG Inserts data display field at the cursor point. Accesses
the display register information.
Note: Display values must be positioned before the
data entry field.
[F2] ENTRY REG Inserts data entry field at the cursor point. Accesses
the entry register information.
[F3] MAP SCREEN Accesses screen mapping functions that link
application screens in a logical sequence. Link
screens only after all of the screens have been
created.
[F4] COPY SCREEN Copies an existing screen to the current window.
Both the source and destination screens must be of
the same type (Data Entry screens).
[F7] CLEAR SCREEN Clears the current screen. You have the option of
clearing only the screen text or deleting the entire
screen including any linking you may have established.
[F8] CHANGE
SCREEN Selects another operator screen.
[F9] SAVE Saves the application without exiting the Screen
Builder function.
[F10] EXIT Prompts you to save the application to the current file
and exits the DPS software.