Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 29)

Publication 2707-PM002B-EN-P
Designing Microview Applications 3-9
Recommended sequence for designing an application
1. On paper, design all the operator screens with the associated
register numbers, and produce a map of how all screens are
linked together.
2. Construct all screens using DPS. Save the program file without
linking.
3. Link the application screens. Use the design from step 1.
When you have established all links, save the program file.
An error display will warn you of any unlinked screens.
4. Download the application file.
5. Use the Simulate function (described in the MicroView User
Manual) to verify operations such as screen links, text, and
screen types.
6. Run the application.