Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 50)

Publication 2707-PM002B-EN-P
7-4 Creating Data Display Screens
4. Enter the screen text to the point where you want the data
display field to be inserted. You can either leave spaces for the
display field or enter the display field at this time. Position the
cursor where you want to insert the data display.
5. Press [F1] to insert a display register.
You are prompted to select a register type. Refer to Chapter 3
for a list of the applicable file types for MicroLogix DF1 protocol.
6. Select a register type.
You are prompted for data specific to the selected register type:
7. Enter the register data. Refer to the next section Display Register
Format Selections.
IMPORTANT
32 Bit Register Types appear in the list but
are not available.
16 Bit Signed Integer Shown