Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 49)

Publication 2707-PM002B-EN-P
Creating Data Display Screens 7-3
Creating a Display Screen The display register data field may be inserted anywhere on the
screen. The number of positions required for the data field depends
upon the register information you provide. You can insert the display
data while you are entering the screen text or you can leave spaces
and insert the data field later.
To create a data display:
1. Select Screen Builder from the Edit File - Option Selection menu.
The Screen Builder for the main menu (screen #1) is displayed.
2. Press [F8] and enter the display screen # or press [F6] for the
next unused screen.
3. You are then prompted to choose a screen type. Select Data
Display Screen and press [Return].
The Screen Builder for a data display screen appears.