Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 16)

Publication 2707-PM002B-EN-P
2-6 Installing and Running the MicroView Programming Software
Running DPS To run the MicroView Programming Software:
1. Verify that you are at the \MDPS subdirectory where the
software resides.
If you are not, enter cd \MDPS and press [Return].
C:\MDPS>
2. Type DPS and press [Return] to start the program.
C:\MDPS> DPS [Return]
3. Specify whether you are using a color monitor. Enter [Y] or [N].
The startup screen displays. It identifies the MicroView version
and licensed owner. A phone support number is provided for
your assistance.
When you press any key, the Opening Menu appears:
You are now ready to create a file for your application.