Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 78)

Publication 2707-PM002B-EN-P
11-6 Linking Menu and Application Screens
2. Press [F3] to select the MAP Screen function.
The current screen links are displayed along with the screen
linking function key operation.
3. Press [F1] to create a bidirectional link (operator can move
between screens) or [F3] to create a Goto (one way link, this
screen to specified screen).
You are prompted to enter a screen number.
4. Enter a screen number (in this example, screen #33) and press
[Return]. The screen link is shown in the Screen Linkage
description.
5. Press [F9] to save the screen edits.
When you open the screen that was just linked (screen #33), the
Screen Linkage description will show that there is now a
previous screen link to that screen.
INSERT SCREEN LINKAGE
SCREEN TO LINK TO: 33
SCREEN LINKAGE
NEXT SCREEN IS SCREEN 33.
PREVIOUS SCREEN IS UNLINKED.
SCREEN LINKAGE
NEXT SCREEN IS UNLINKED.
PREVIOUS SCREEN IS SCREEN 26.