Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 37)

Publication 2711-PM002B-EN-P
Using Screen Builder 5-3
3. Press [F8] on any screen to access the other screen types. You
are prompted for a screen number:
Press [F6] to go to the next available unused screen. Press [F8] to
view the next programmed screen. Press [F1] to go to the first
screen that you created. Press [F2] to go to the last screen of the
current program.
4. If you enter any screen number other than screen #1 (main
menu screen), you are prompted for a screen type:
5. Select a screen type. A Screen Builder for the selected screen
type is then displayed. Refer to Chapters 6 through 10.
Screen Type Chapter
Menus and Sub–Menus 6
Data Displays 7
Data Entry 8
Security 9
Recipe 10