Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 48)

Publication 2707-PM002B-EN-P
7-2 Creating Data Display Screens
Data Display Screen
Builder The screen for creating data display screens has a maximum display
size of 2 lines of 16 characters.
Data Display Screen Builder Function Keys
Function
Key Designation Function
[F1] DISPLAY REG Inserts data display field at the cursor point. Accesses
the display register information.
[F3] MAP SCREEN Accesses screen mapping functions that link application
screens in a logical sequence. Link screens only after all
of the screens have been created.
[F4] COPY SCREEN Copies an existing screen to or from the current display
window. Both the source and destination screens must
be of the same type (Data Display screens).
[F7] CLEAR
SCREEN Clears the current screen. You have the option of
clearing only the screen text or deleting the entire
screen including any linking you may have established.
[F8] CHANGE
SCREEN Selects another operator screen.
[F9] SAVE Saves the application without exiting the Screen Builder
function.
[F10] EXIT Prompts you to save the application to the current file
and exits the DPS software.