Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 95)

Publication 2707-PM002B-EN-P
MicroView Function Key Builder 13-5
Linking Screens to Function
Keys You can link function keys [F1] and [F2] to individual screens.
To link screens to function keys:
1. At the Opening menu select Edit Program File and enter a file
name.
The Edit File - Option Selection menu is displayed.
2. Select Function Key Builder.
The Function Key Builder screen appears.
3. Use the arrow keys to highlight the function key you want to
assign.
4. Enter a screen number for the function key and press [Return].
To see the screen you are assigning, press [F1] and [F2].
You are prompted if you want the key to auto return.
5. Enter [Y] for Auto Return Mode or [N] for Continue Mode and
press [Return].
6. Assign the other function key using the same procedure. To
assign bit write mode functions, refer to the next section.
7. Press [F9] to save the screen.