Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 21)

1 Publication 2707-PM002B-EN-P
Chapter
3
Designing Microview Applications
Chapter Objectives This chapter provides guidelines for creating MicroView applications.
MicroView Operator
Terminal MicroView application programs are created using MicroView DPS.
The development of applications for the MicroView are very similar to
the DTAM Micro and DTAM Plus. The differences in application
development are related to differences in the operator terminals. The
following table lists MicroView Functional considerations.
Section Page
MicroView Operator Terminal 3-1
MicroView File Types 3-2
Screen Types and Data Formats 3-3
Data Scaling 3-4
Application Example 3-6
Description of Example Application 3-7
Designing an Application 3-8
Function MicroView
Screen Capacity Up to 50 Screens
Display Format 2 Line x 16 Character
Function Keys 2
Recipe Operations Yes
Advisor Option Yes
Screen Write Option Yes
Alarm Screens No
Point Access Display (P/AD) Yes
Auto Scaling Yes
Printer Port No
Mode Menu Changing of Comm. port Baud Rate
Mode Menu changing of Security Codes Yes
Processor Registers Supported MicroLogix