Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 71)

Publication 2707-PM002B-EN-P
Creating Recipe Screens 10-3
Creating a Recipe Screen To create a recipe screen:
1. Select Screen Builder from the Edit File - Option Selection menu.
The Screen Builder for the main menu (screen #1) is displayed.
2. Press [F8] and enter the display screen # or press [F6] for the
next unused screen.
3. You are then prompted to choose a screen type. Select Recipe
Screen and press [Return].
The Screen Builder for a recipe screen appears. You are asked
whether the operator is to be prompted before the recipe data is
downloaded (manual or automatic operation).
4. Enter [Y] or [N] and press [Return]. If you select [Y], the operator
is prompted to acknowledge the screen. The operator must
press [
] on the MicroView. If you select [N], the download
occurs automatically when the screen is selected. The operator
in most cases will not even see the screen, only the message that
data is being downloaded.