Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 94)

Publication 2707-PM002B-EN-P
13-4 MicroView Function Key Builder
Function Key Builder The screen for assigning MicroView function key options is shown
below:
Function Key Builder Function Keys
Function
Key Designation Function
[F1] PREV SCREEN Displays next programmed screen in display
window. Use this display as a reference when
assigning screen numbers to function keys.
[F2] NEXT SCREEN Displays previous programmed screen in display
window. Use this display as a reference when
assigning screen numbers to function keys.
[F5] BIT WRITE REG Prompts you for a base register location.
[F7] CLEAR F KEYS Clears all screen and bit write mode operations
assigned to the function keys.
[F9] SAVE Saves the application without exiting the Function
Key Builder screen.
[F10] EXIT Prompts you to save the application to the current
file and exits the DPS software.