Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 96)

Publication 2707-PM002B-EN-P
13-6 MicroView Function Key Builder
Assigning Bit Write
Functions To assign bit write mode functions:
1. Open the Function Key Builder screen, refer to previous section.
2. Press [F5] to assign the bit write mode register.
You are prompted to enter a base register.
3. Enter the base register number (for function key F1) and press
[Return], the next register will automatically be assigned to
function key F2.
You are prompted to clear or set a bit when the operator presses
the function key.