Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 60)

Publication 2707-PM002B-EN-P
8-4 Creating Data Entry Screens
4. Create all of the screen text and, if used, a data display field.
Refer to Chapter 7 for information on how to insert a data
display field. The same procedures apply to a data display on
the data entry screen.
5. Position the cursor where you want to insert the data entry field.
6. Press [F2] to insert a data entry register.
You are prompted to select a register type. Refer to Chapter 3 for
a list of the applicable register types for each.
Display Field and Text
Data Entry
Position