Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 85)

Publication 2707-PM002B-EN-P
Entering MicroView Configuration Data 12-7
Special Security Screen The special security screen restricts access to the MicroView Mode
Menu. The MicroView Mode Menu allows an operator to directly
access controller data files and other controller functions. Providing a
security screen protects against unintended use of these functions. If
you don’t provide a special security screen, the Mode Menu is
available to any operator when they press [Mode] on the MicroView.
When you select Special Security Screen from the Configuration –
Option Selection menu, the first security screen is displayed:
To enter new security codes:
1. Enter an eight digit code. Press [Return] to advance to the next
security code. Enter up to three eight digit codes.
2. Press [F9] to save the new security codes and advance to the
next screen. If you do not wish to edit the security message,
Press [Esc] to exit the Special Security Screen. You are returned
to the Configuration - Option.
TIP
Use a question mark ? to specify a wild card
character. A wild card character matches with
any character input by the operator.