Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 67)

Publication 2707-PM002B-EN-P
Creating Security Screens 9-3
Creating a Security Screen You can specify up to three separate codes for each Security Screen.
An operator is allowed access by entering any of the assigned security
codes.
To create a security screen:
1. Select Screen Builder from the Edit File - Option Selection menu.
The Screen Builder for the main menu (screen #1) is displayed.
2. Press [F8] and enter the display screen # or press [F6] for the
next unused screen.
3. You are then prompted to choose a screen type. Select Security
Screen and press [Return].
The Screen Builder for a security screen appears.
4. If no security codes have been previously defined, you are
prompted to enter a code(s).