Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 33)

Publication 2707-PM002B-EN-P
Creating or Editing an Application File 4-3
The Edit File - Option Selection menu is displayed.
3. Access the following functions from the Edit File - Option
Selection menu to create your application screens and enter
configuration data.
Saving Application File Save the application periodically while you are working on the
application screens and save the file again before you exit the
software.
To save an application periodically during editing:
1. Press [F9].
You are prompted to save the application under the current file
name or you can enter a new file name.
Select this Menu Option: To:
MicroView Configuration Data Set configuration and operating
parameters.
Screen Builder Create or modify application screens.
Function Key Builder Assign application specific operations to
the MicroView function keys.