Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 108)

Chapter 14
Entering DTAM Configuration Data
14–2
The following shows how to access DTAM Plus configuration data.
The procedures for the DTAM Micro are similar.
1. Select Edit Program File from the Opening menu.
You are prompted for a file name.
2. Enter the file name of the application.
The Edit File -Option Selection menu displays.
3. Select DTAM Configuration Data.
The DPS Configuration -Option Selection menu displays.
DTAM Plus DTAM Micro
SLC or PLC
Depending Upon Protocol SLC or PLC
Depending Upon Protocol
4. Select the configuration item you want to modify. Refer to the
appropriate section in this chapter for additional information.
Accessing Configuration Data