Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 128)

Chapter 15
DTAM Plus Background Monitor
15-2
The screen for editing the Background Monitor is the same for a DTAM Plus
communicating with an SLC or PLC.
Background Monitor Function Keys
Function Function
Key Designation Function
[F1] SHOW NEXT
ALARM
Displays all defined alarm screens to allow you to select a particular
alarm screen to be assigned to the monitor definition. Pressing [F1]
scrolls through a list of the defined alarm screens.
[F2] NEXT FORM # This function is similar to the [F1] Show Next Alarm function, however
defined Printer Form numbers are displayed rather than alarm screens.
Printer forms exceed the display format of the editing screen,
therefore, only the printer form numbers are displayed.
[F3] DELETE
SCREEN #
Allows you to delete a selected Alarm or Printer Form Screen number.
The screen number is removed from the field in the Control Window
definitions.
[F5] PREVIOUS
BIT
Displays the programmed parameters for the previous bit within the 16
bit background register selected. It is only available for bit data
formats.
[F6] NEXT BIT Displays the programmed parameters for the next bit within the 16 bit
background register selected. It is only available for bit data formats.
[F7] DELETE REG Deletes all parameters that have been defined for this background
register.
[F8] NEXT
REGISTER
This function displays the next background register and its respective
parameters.
[F9] SAVE Saves your program while allowing you to stay in the Background
Monitor.
[F10] EXIT Prompts you to save the current file, then exits the DPS program.
Background Monitor Screen