Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 92)

Chapter 11
Creating Bar Graph Screens
11–4
To create a bar graph screen:
1. Select Screen Builder from the Edit File - Option Selection menu.
The Screen Builder for the main menu (screen #1) is displayed.
2. Press [F8], enter the display screen #, and select Bar Graph
Screen type.
The Screen Builder for a bar graph screen appears and you are prompted
for a register type 16 Bit Signed Integer or 16 bit BCD.
3. Select a register type.
You are prompted for the register information.
4. Enter the register data, refer to the next section Bar Graph Register
Format selections.
5. Press [Esc] to save the register data.
You are prompted to enter any screen text on the first 2 lines of the
display screen.
Creating a Bar Graph Screen