Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 60)

Chapter 7
Creating Data Display Screens
7–4
5. Select a register type.
You are prompted for data specific to the selected register type:
16 Bit Signed Integer Shown
6. Enter the register data. Refer to the next section Display Register Format
Selections.
7. After entering the register data, press [Esc] to save the data and return to
the screen editing. The data display register field is indicated by a series
of asterisks ****. The number of asterisks and format (decimal point and
sign) is determined by the register data you entered.
Data Display
Register
8. Enter the remainder of the screen text or additional display registers and
press [F9] to save the screen.
Note: Move the cursor off the data display field using the arrow keys
before entering additional screen text. If you attempt to enter text over a
display field you will be prompted: