Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 116)

Chapter 14
Entering DTAM Configuration Data
14–10
Only available on a DTAM Plus with an optional printer port. Use this
screen to set the operating parameters of the printer port.
When you select Printer Port from the DPS Configuration - Option Selection
menu, the following is displayed:
Baud Rate
Default is 9600 baud. Baud rate options are 38400, 19200, 9600, 4800,
2400, 1200, and 300. Select a baud rate that matches your printer.
Parity
Default is Even parity. Parity options are None, Odd, or Even.
Data Bits
Defines the word length, the default is eight bits. Data bit options are Seven
or Eight bits.
Printer Port Parameters