Background monitor register selections – Rockwell Automation 2707-NP DTAM Programming Software User Manual
Page 131
Advertising
![background image](/manuals/580765/131/background.png)
Chapter 15
DTAM Plus Background Monitor
15-5
When assigning a background register, you must provide register information
that determines the address and data limits.
Bit
The register information for a Bit background register is shown below.
Parameter
Description
Register Number
The PLC or SLC register number you want to monitor.
Bit Number
The bit number of the register to monitor.
Alarm State
The bit status that will indicate an alarm state. The bit status may be
either 1 (on) or 0 (off).
Screen Number
The number of the screen to display when the status of the
monitored bit indicates an alarm state.
Background Monitor
Register Selections
Advertising