Rockwell Automation 2707-NP DTAM Programming Software - Manual (Page 58)

Chapter 7
Creating Data Display Screens
7–2
The screen for creating data display screens is the same for the DTAM Plus
and DTAM Micro. The only exceptions are the DTAM Micro display does
not show the time and date function keys and has a smaller display size (2
lines of 20 characters).
Data Display Screen Builder Function Keys
Applies to:
Function
Key Designation
DTAM
Plus
DTAM
Micro Function
[F1] DISPLAY REG
✓ ✓
Inserts data display field at the cursor point.
Accesses the display register information.
[F3] MAP SCREEN
✓ ✓
Accesses screen mapping functions that link
application screens in a logical sequence.
Link screens only after all of the screens have
been created.
[F4] COPY
SCREEN
✓ ✓
Copies an existing screen to or from the current
display window. Both the source and destination
screens must be of the same type (Data Display
screens).
[F5] INSERT TIME
✓
Inserts the time into the display. Only available
on a DTAM Plus having the Calendar/Clock
option.
[F6] INSERT DATE
✓
Inserts the date into the display. Only available
on a DTAM Plus having the Calendar/Clock
option.
[F7] CLEAR
SCREEN
✓ ✓
Clears the current screen. You have the option of
clearing only the screen text or deleting the
entire screen including any linking you may have
established.
[F8] CHANGE
SCREEN
✓ ✓
Selects another operator screen.
[F9] SAVE
✓ ✓
Saves the application without exiting the Screen
Builder function.
[F10] EXIT ✓ ✓ Prompts you to save the application to the
current file and exits the DPS software.
Data Display
Screen Builder